AhsayUBS Pre-Installation

Before installing AhsayUBS on a machine, please verify if the following tasks have been done:

1. Physical server installation: Deploy the AhsayUBS image to USB removable storage device.
2. Virtual Machine installation: Download the AhsayUBS ISO from here.
3. The installation media is connected to the target machine.
4. Shutdown the target machine.
5. Power on the machine and enter the BIOS settings page. (Please refer to the motherboard manual for the instruction to enter BIOS settings page.)
6. Configure the boot priority of the AhsayUBS machine to boot from the USB removable storage device, or ISO.
7. Save the settings and exit the BIOS.
8. Reboot the machine and boot up from the installer device.