How to start AhsayCBS in debug mode?

Article ID

2014

Last Reviewed Date

Product Version

AhsayCBS: 7.17 or above

Operating System

All platforms

Symptom

This article contains instructions on how to start AhsayCBS in debug mode.

Resolution

Refer to the following steps to start AhsayCBS in debug mode.

  1. Edit the 'cbs.opt' file, located in the installation home and installation home conf folder:

    ${Install-Home}\conf

    Value of ${Install-Home} for various operating systems:

    • Windows C:\Program Files\AhsayCBS
    • Linux/Unix /usr/local/cbs

  2. Open the 'cbs.opt' file with a text editor. Edit the debug option parameters by adding the value 'true' to the end of the corresponding line, similar to the example below:

    cbs.opt (Updated)
    ...
    #
    # OBS debug options
    # Verify backup data (hashed path, client path, size, block sequence, crc, etc.) during upload
    com.ahsay.obs.core.bfs.append.debug=
    #
    # Verify rebuild operation
    com.ahsay.obs.core.bfs.Rebuild.debug=
    com.ahsay.obs.core.bfs.debug= true
    #
    ...
    There are multiple debug options that are available in the 'cbs.opt' file.
    Consult with Ahsay support representatives if you are unsure which debug mode should you enable (e.g. to troubleshoot your server issue.)
  3. Save the changes to the 'cbs.opt' file afterward, then restart the AhsayCBS and AhsayCBS NFS service.

Video Page

How to start AhsayCBS in debug mode?